What is the difference between a single cut and a double cut file?
What will be an ideal response?
A single cut file has straight teeth going in one direction. A double cut file has teeth going in two
directions.
You might also like to view...
When using explosives, the specific precautions to be taken to prevent accidental discharges:
A. In holes that have been primed and shunted, detonators should be short-circuited until they are connected into the blasting circuit. B. In the event of a lightning storm, blasting operations should be suspended and all personnel should be removed from the blasting area. C. Warning signs should be prominently displayed to warn against the use of radio transmitters within 1000 feet of the blasting site. D. All of the above
A rack and pinion steering system has excessive steering wheel free play. Technician A says one of the inner tie-rod ends may be worn. Technician B says the steering gear mounting brackets may be loose. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
An acceptable charging circuit voltage on a 12 volt system is __________
A) 12 to 14 volts B) 13.5 to 15 volts C) 12.6 to 15.6 volts D) 14.9 to 16.1 volts
The internal piston in the reversing valve is moved from one side to the other by
A) A stepper motor B) Pressure difference C) Permanent magnets attached to the ends of the piston D) A gear motor