Branch ducts should always use what component to balance the air to the individual areas?

What will be an ideal response?


dampers

Trades & Technology

You might also like to view...

Bladder tanks used in private water systems are pressurized through the use of a _____.

a. Schrader valve b. Schneider valve c. Switzer valve d. Statler valve

Trades & Technology

What cylinder number is the closest to the front of the engine on almost all V-type engines?

A. 1 B. 2 C. 4 D. 6

Trades & Technology

Places where tapered board edges meet each other are described as _____.

a. flat joints b. seams c. intersections d. butt joints

Trades & Technology

After having troubleshot a series RL circuit, you check the resistance of the inductor and it is around 40 ohms. What conclusion does this bring you to?

A) Since the inductor's voltage was nearly zero, you are sure the windings have shorted. B) Since the inductor's voltage was nearly zero, the inductor is probably okay so the resistor must be shorted. C) Since the inductor's voltage was nearly zero, the inductor is probably okay, so the resistor must be open. D) not enough information

Trades & Technology