The outside of a soldered joint looks complete, but when it is cut open for testing, the solder has not flowed into the joint. What may have happened to cause this?
A) The pipe was heated before the joint. B) The wrong type of solder was used.
C) The joint was heated before the pipe. D) The pipe was overheated.
C
You might also like to view...
Text-based data assigned to a specific object is known as:
a. Material take off (MTO) b. Attributes c. Drafting standards d. CADD symbols
What type of tray design is designed with perforated openings, typically circular, in the tray deck?
A) Sieve tray B) Valve tray C) Bubble cap tray D) Overhead tray
____________________ and sine plates are used to measure angles that have been cut in parts and to position parts that are to be cut at specified angles.
Fill in the blank(s) with the appropriate word(s).
Instead of using fuses as the programmable links, the GAL uses ________
Fill in the blank(s) with correct word