The drafter can choose weather construction lines are more effective when drawn at 45 degree or 90 degrees.
Answer the following statement true (T) or false (F)
False
You might also like to view...
Air exits a compressor operating at steady-state, steady-flow conditions at 150°C, 825 kPa, with a velocity of 10 m/s through a circular pipe of 5.0 cm diameter.
(a) Determine the outlet volumetric flow rate and the mass flow rate of the air. (b) If the air enters the compressor through an inlet at 20.0°C and 100. kPa, and a velocity of 1.0 m/s, determine the volumetric flow rate of the air entering the compressor and the required cross-sectional area of the inlet. (c) Using your equations, plot the inlet volumetric flow rate and the inlet cross-sectional area as the inlet air velocity is varied between 0.25 m/s and 10.0 m/s. Given: T2 = 150°C = 423 K; P2 = 825 kPa; V2 = 10 m/s; D2 = 5 cm = 0.05 m What will be an ideal response?
El contratista general es responsable de gestionar todos(as) los(as) _____ necesarios para llevar a cabo el proyecto
a. procedimientos de seguridad b. estimaciones c. oficios d. presupuestos
Too much sand topdressing makes the surface of a putting green too ____________________
Fill in the blank(s) with correct word
____ consist of schematic, symbolic representations of valves, fittings, and so on connected by a single line that represents the centerline of the pipe.
A. Dimensional pipe drawings B. Double-line pipe drawings C. Connection detail pipe drawings D. Single-line pipe drawings