How would you adjust the hydraulic lifter lash with the engine idling?
What will be an ideal response?
To adjust hydraulic lifter lash with the engine idling, loosen the rocker arm adjusting nut until a clicking sound is heard. Then tighten the nut just until the noise stops. This point is called zero lash. Then shut the engine off and tighten each adjuster the specified amount. Wait 20 minutes for the lifters to bleed down before starting the engine.
You might also like to view...
The valve in most shock absorbers/struts is designed to vary the oil flow through the valve in relation to what?
What will be an ideal response?
An arc blast is the ______________________________________________ of air and metal associated with an arc flash.
What will be an ideal response?
What were the primary causes of the revolt in the Spanish Netherlands?
a. religion and trade b. religion and politics c. politics and trade d. religion and failed diplomacy
An inductive load that has a resistive component of 4 ? is connected to an ac source of 120 V (rms) through a half-wave SCR circuit. When the triggering angle of the SCR is 50o , the conduction period is 160o . Calculate the following:
a. Average voltage across the load b. Average voltage across the resistive element of the load c. rms voltage across the load d. Average current of the load e. If a freewheeling diode is connected across the load, calculate the load rms voltage. Assume that the current of the diode flows for a complete half cycle.