Technician A says that when doing the final washing of a vehicle before masking, it should be cleaned inside all the openings where repair dust may have accumulated. Technician B says that the entire vehicle should be cleaned with wax and grease remover before masking as well. Who is correct?
A. Technician A only
B. Technician B only
C. Both Technicians A and B
D. Neither Technician A nor B
A. Technician A only
You might also like to view...
When the engine is running, the ____ spins the rotor inside the stator windings.
A. drive belt B. battery C. armature D. solenoid
Find the mesh currents in the circuit of Fig. 13.128 below.
 figure 1.png)
State the term that refers to the observation and examination of a building over the course of its entire life, and considers everything about the building from design, commissioning, operation, and decommissioning:
What will be an ideal response?
When plating such as chromium, copper, and brass, or coatings such as galvanizing, polyurethane, and silicone, are applied to a part or feature, the specified dimensions ____.
A. should not be defined in relationship to the coating or plating process B. should be defined in relationship to the coating or plating process C. can be found in the reference tables that describe the coating or plating process D. both b and c E. none of the above