What is another name for a positive-drive belt?
A. cogged belt
B. tension belt
C. toothed belt
D. timing belt
Answer: D
You might also like to view...
Among the commonly used structural materials (steel, concrete, masonry and wood), which has the highest modulus of elasticity and which has the lowest modulus elasticity?
What will be an ideal response?
To prevent diseases from entering the herd, livestock producers should buy only healthy animals, and
keep them quarantined for _____.
a. 60 to 90 days c. 1 to 2 days b. 10 to 30 days d. 4 to 5 months
Answer the following statement(s) true (T) or false (F)
1. For the protection of a meter, the range should never be exceeded. 2. On a VOM, the correct alignment is achieved when the mirror image of the pointer disappears behind the pointer itself. 3. Wattmeters generally have a range switch indicating multiplier values, such as X 1 or X 100, which means that each reading taken on the scale must be multiplied by the value indicated on the range switch. 4. The proper techniques of connecting electrical meters should be demonstrated and practiced in a laboratory setting. 5. Always connect voltmeters perpendicular to a load or source.
Technician a says that recovery/recycling/recharging equipment for R-1234yf refrigerant requires integration with a refrigerant identifier. Technician b says that recovery/recycling/recharging equipment for R-1234yf refrigerant uses a 17mm O.D quick coupler on the low side service hose. Who is right?
A) A only B) B only C) Both A and B D) Neither A or B