Engineering drawings provide information about
a. size, shape, and material of a product.
b. dimensions and tolerances.
c. surface finish and part number(s).
d. all of the above
d. all of the above
You might also like to view...
The Battle of Antietam was particularly critical because it
A. inflated an already dangerous overconfidence among Southerners. B. ended Lee's plan of invading the North. C. delayed Lincoln's plan to announce the Emancipation Proclamation. D. ensured the reelection of President Lincoln. E. probably prevented intervention by Britain and France on behalf of the Confederacy.
Technician A says the AX4N is a nonsynchronous type transaxle. Technician B says in an AX4N transaxle, the intermediate band was eliminated. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
An accumulator at the outlet of the evaporator is there to ____.
A. accumulate moisture in the system to reduce frost formation B. allow the evaporator to operate as full as possible with liquid refrigerant C. provide space for refrigerant vapor to collect D. accumulate foreign particles and other contaminants
Technicians should be careful when brazing lines to evaporator coils that have preinstalled thermostatic expansion valves because the heat from brazing the lines:
A) Alters the chemical makeup of the bulb charge and changes its physical properties. B) Can catch the refrigerant on fire. C) Can weld the sensing bulb to the suction line. D) Can overheat the TEV bulb and destroy the valve.