What are the four rules for selecting a gripper and how are they commonly used by industry in the gripper selection process? Make sure to fully support your answer.
What will be an ideal response?
1 The tooling must be capable of holding, centering, or manipulating the range of parts the robot will work with.2 There needs to be some way of sensing when a gripper has closed on the part or if it is empty.3 The weight of the gripper should be kept as light as possible as this weight is deducted from the robots total payload.4 Proper safety features built into the gripper for the environment it will work in and the parts it will work with.
You might also like to view...
What type of conveyor uses a series of rotating cylinders to move materials?
A. Belt B. Roller C. Moving floor D. Pneumatic
What does the acronym MUX stand for?
What will be an ideal response?
What is the purpose of flux?
A) The flux makes it easier to assemble the fitting B) Remove light surface oxidation and prevent new oxidation C) Prevent the solder from alloying with the pipe D) Promotes surface tension in the solder
The ____ of a zener diode is determined by the resistivity of the diode. This, in turn, is controlled by the doping technique used during manufacturing.
A. breakdown voltage B. power dissipation rating C. derating factor D. reverse voltage