The MIL is turned off under any of the following conditions, EXCEPT ________
A) PCM diagnostic link is grounded
B) Codes are cleared with a scan tool
C) Power to the PCM is disconnected
D) Vehicle is driven on 3 consecutive trips with a warm-up cycle, without detecting a fault
A
You might also like to view...
Describe the operation of an automatic tool change system.
What will be an ideal response?
The proportional band on a controller:
a. is designed to reduce the difference between the set point and process variable by adjusting the controllers output continuously until the offset is eliminated. b. describes the scaling factor used to take a controller from 0% to 100% output. c. is the difference ? between the upper and lower range limits. d. is defined as the portion of the process controlled.
___________________ is a term that means from the time the chemical is manufactured until it is properly disposed of.
Fill in the blank(s) with the appropriate word(s).
The mechanism in a diesel engine differs from an internal combustion engine in that the heat for ignition is generated by increased pressure rather than a spark
Indicate whether the statement is true or false.