Tire explosion occurs when:
a. A machine is overloaded for too long
b. A sharp object punctures the tire
c. A reaction inside the tire causes extreme pressures
d. The machine runs over a gas line
C
You might also like to view...
Cylinder taper and out of round should be measured _______
A) Near the bottom of piston travel B) Just below the ridge C) Both A and B D) Neither A nor B
In rack/slot addressing the slot location of the PLC processor is indicated in the address
Indicate whether the statement is true or false
If you have a spur gear with a friction wheel of diameter equal to .25 at 210 rpm, what is the velocity?
a. 52 ft/min b. 78 ft/min c. 116 ft/min d. 165 ft/min e. 189 ft/min
Write state equations for the circuit of Figure E-17 with the two capacitor voltages 
and 
as the state variables and the voltage at the input, 
as the excitation and the voltage at the output, 
as the response. Then, find and plot the response voltage for a unit step excitation assuming that the initial conditions are
