Also known as a force or shrink fit, this is a condition that exists when, because of the limits of the dimensions, mating parts must be pressed together.

a. clearance fit
b. allowance
c. interference fit
d. maximum material condition


c. interference fit

Trades & Technology

You might also like to view...

Technician A says most shock absorbers and struts have a 50/50 ratio. Technician B says a strut with a 70/50 ratio has more resistance to movement on the extension cycle. Who is correct?

A. A only B. B only C. Both A and B D. Neither A nor B

Trades & Technology

Which of the following is true about relative humidity?

a. It doesn’t change with the temperature of the air. b. It is the actual amount of water vapor present per lb or kg of air. c. It decreases with the air temperature. d. For a given amount of water vapor in air, it varies with air temperature.

Trades & Technology

If the base of a triangle is 13.3 mm and the height is 12.1 mm, what is the area in sq mm? Round to the nearest tenth.

A. 78.6 B. 160.9 C. 34.9 D. 80.5

Trades & Technology

After disconnecting equipment to be serviced, it must be ___________________.

A. locked out B. tagged out C. labeled D. a and b

Trades & Technology