What units are most commonly used to measure heat quantity in the United States?
A) Degrees Fahrenheit B) Joules
C) Kilocalories D) BTUs
D
You might also like to view...
A 1-in-diameter rod, 3 ft long, of unknown material is found in a machine shop. A variety of inexpensive nondestructive tests are readily available to help determine the material, as described below:
On an independent rear suspension system, the right-rear tire has excessive wear on the inside edge of the tread. The most likely cause of this problem is:
A. Worn lower control arm bushings B. A failed rear sway bar link C. A worn-out right-rear strut D. Low tire pressure
Precast concrete curtain (PCC) wall panels are non-load-bearing elements. Yet the concrete used in them is of higher strength (generally 5,000 psi) than that used in the structural frame of the building (general 4,000 psi). Explain why that is so.
What will be an ideal response?
When you are starting to move up a hill from a stop:
a. Keep the trailer brake hand valve applied until you reach 20 mph. b. Engage the clutch and accelerate quickly. c. Release the parking brakes as you apply engine power.