All of the following statements are true EXCEPT:
A. installing the cross with the zerk fitting backwards will make it difficult, if not impossible, to lube the U-joint after the driveshaft is installed on the vehicle.
B. universal joint lubricant is NLGI #5, with an extreme pressure (EP) additive.
C. sometimes, universal joint cups are held in place with plastic material that is injected into a hole in the yoke.
D. usually galling will be found on a trunnion 180 degrees to brinelling.
Answer: B
You might also like to view...
When arc welding, the general rule is that arc length should be _____.
a. half the electrode diameter b. equal to the electrode diameter c. twice the electrode diameter d. slightly less than the electrode diameter
The ecliptic is high in the sky at noon in summer. Is it still high in the sky at midnight? Explain your answer
What will be an ideal response?
Two technicians are discussing FWD driveshaft service. Technician A says that removal of the driveshaft usually requires partial disassembly of the front suspension. Technician B says that one of the the first steps in driveshaft removal is to loosen the front hub nut. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
In binary addition, 1 + 0 = 01
Indicate whether the statement is true or false