The meter needle should be between 13.0 and 14.5 during normal operation for the

A. voltmeter
B. tachometer
C. fuel gauge
D. odometer


Answer: A

Trades & Technology

You might also like to view...

Assume an insulated vessel has a circumference of 62' (18.9 m) and a tan-tan height of 33'– 9" (10.3 m). There will be 8 sections per course with 3" (8 cm) overlaps at the seams. Estimate the total number of 48" (1.22 m) roll jacket sections needed to cover the sidewall.

a. 32 b. 48 c. 72 d. 96

Trades & Technology

The physical properties of a No. 4/0 copper conductor would be found in _____.

a. NEC Table 310.15(B)(16) b. NEC Chapter 9, Table 8 c. NEC Chapter 9, Table 1 d. NEC Table 310.15(B)(7)

Trades & Technology

At what point should a brazed joint be washed with a wet rag?

a. As soon as the brazing is done b. Not until the joint cools to 250°F c. After it has cooled for at least 30 minutes d. As soon as it cools to 500°F

Trades & Technology

What is the frequency of an astable multivibrator when RA = 10K ohms, RB = 5K ohms, and C = 2 ufd?

What will be an ideal response?

Trades & Technology