The standard diametric clearance between bolt and flange-hole is _________.
Fill in the blank(s) with the appropriate word(s).
1/8"
You might also like to view...
Who were the European mercenaries who fought for the British crown?
A. Privateers B. redcoats C. Yorkers D. Hessians E. Loyalists
Throughout most of the twentieth century, one of the widely used portable test instruments has been the ____.
a. VM (short for volt-milliamperes) b. WOM (short for watt-ohm-milliamperes) c. VOM (short for volt-ohm-milliamperes) d. WM (short for watt-milliamperes)
The electromechanical odometer uses a(n) ____stepper motor that receives control signals from the speedometer circuit.
A. AC B. DC C. oscillating D. negative
To calculate the minimum number of 20-ampere branch circuits required in a dwelling, you should multiply the dwelling square footage by 3 volt-amperes to obtain total volt-amperes, divide by 120 volts to obtain the total amperes, and finally, ____.
A. multiply by 20 and round up to obtain the number of circuits B. divide by 20 and round down to obtain the number of circuits C. divide by 20 and round up to obtain the number of circuits D. multiply by 20 and round down to obtain the number of circuits