With the help of a sketch, explain why and where building separation joints should be provided.
What will be an ideal response?
See the Instructor's Manual (IM).
You might also like to view...
What results from increasing rocker ratio?
A. Decrease in output travel at the pallet end of the rocker arm. B. Decrease in mechanical advantage. C. Increase the amount of pushrod travel. D. Increase the output travel at the pallet end of the rocker arm.
A comparator has a 5.1 V zener in the feedback circuit. If the anode is connected to the output the maximum positve output is
A) +0.7 V B) +5.8 V C) -0.7 V D) +5.1 V
Determining the need for labor, machines, and physical resources to meet the production objectives of the firm is called:
A) production planning. B) capacity planning. C) production control. D) all of the above E) none of the above
When you are installing a prehung door, what should be done with the factory-installed spacer shims between
the door and the frame? a. Leave them in place permanently. b. Remove them after the door is attached to the rough opening. c. Remove them before you start the installation. d. Remove them when the door is in place, but before you attach it to the rough opening.