Find the impulse responses of the two systems in Figure E-25. Are these systems BIBO stable?
Impulse response is not absolutely integrable. BIBO unstable.
Impulse response is absolutely integrable. BIBO stable.
You might also like to view...
Name five devices used in the HVAC industry that can be controlled by a relay.
What will be an ideal response?
Totem-pole outputs ________
A) can be connected in series when higher output voltages are required B) can be connected in parallel when higher output currents are required C) can be connected together to handle higher load currents and output voltages D) cannot be connected together because high currents can damage one or both of the transistors if the outputs are in opposite states (one HIGH and one LOW)
Which of the following statements is accurate?
A) Nitrogen should not be in the system while brazing. B) Nitrogen flow must be kept below 2 psig while brazing. C) Nitrogen flow should be kept at design pressure while brazing. D) Nitrogen flow must be kept at 50 psig while brazing.
When loading a trailer, if the cargo is loaded all to the rear, it may result in:
a. Damage to steering axle. b. Wheel lockup. c. Poor traction on drive wheels. d. None of the above.