Which 8085 instruction causes data from the accumulator to be sent to an output device #0FH?
A) OUT 0FH B) MVI A,0FH C) OUT A,0FH D) MOV A,OUT
A
You might also like to view...
What volume of dirt is needed to backfill a rectangular geothermal heat exchange bed that measures 36 ft. 4 in. by 114 ft. 6 in. to a depth of 4 ft. 4 in.? (Rounded off to 2 decimal places if necessary.)?
Fill in the blank(s) with the appropriate word(s).
Do you think plants that are insect pollinated or plants that are wind
pollinated are more efficient at pollination? Why?
What will be an ideal response?With no load attached, the voltage at the terminals of a particular power supply is 50.8 V. When a 10-W load is attached, the voltage drops to 49 V. a. Determine vS and RS for this non ideal source. b. What voltage would be measured at the terminals in the presence of a 15-? load resistor? c. How much current could be drawn from this power supply under short-circuit conditions?
What will be an ideal response?
The combined weight of a building's structure and its foundation make up its _____
a. dynamic load b. ground load c. static load d. total load