Name two ways cheeses are classified
What will be an ideal response?
according to the type of milk and the type of processing
You might also like to view...
The first step in creating a root cause diagram is to _____.
a. draw the fishbone diagram b. decide what is causing the problem c. create a problem statement d. develop an agenda for the problem-solving meeting
A cable is made up of four wires. The breaking strength of each wire is a normally distributed random variable with mean 10 kN and standard deviation 1 kN. The strength of the cable, using the brittle wire method, is estimated to be the strength of the weakest wire multiplied by the number of wires.
a. Use simulated samples of size 1000 to estimate the mean strength of this type of cable. b. Estimate the median cable strength. c. Estimate the standard deviation of the cable strength. d. To be acceptable for a certain application, the probability that the cable breaks under a load of 28 kN must be less than 0.01. Does the cable appear to be acceptable? Explain.
A P0100 DTC is being discussed. Technician A says that an open or short in mass air flow circuit could be the cause. Technician B says that a defective MAF sensor could be the cause. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
What is commonly done when a drop-in refrigerant is placed in operating equipment?
a. A crankcase heater is installed. b. The oil is replaced. c. A leak-detecting dye is added. d. The refrigerant piping is replaced.