An open wire at point "A" would have what result?
a. The SEAT CB will open due to high current flow.
b. The rear tilt motor only will not function.
c. None of the motors will function.
d. Not enough information
NONE OF THE MOTORS WILL WORK
You might also like to view...
Consider the hypothetical free?energy diagram of an ideal solution shown in Fig. 10.5. Now assume that a layer of pure metal A, is bonded to a layer of pure metal B, that 40 percent by weight of the couple is in the A metal layer, and that the atomic weights of metals A and B are 80 and 60 grams per mole, respectively. Furthermore, assume that the couple is held long enough at 500 K so that, as a result of diffusions, a homogeneous solid solution is obtained.
(a) What would be the free energy of the couple at the beginning of the diffusion anneal? Give the answer in Joules per mole. (b) What would be the free?energy of the homogenous solid solution at the end of the diffusion anneal? Give the answer in Joules per mole.
Which roof type is shown at the center of the accompanying picture?
A. gable B. gambrel C. shed D. hip
GFCI breakers are typically used for what types of circuits?
A) On all residential electrical circuits B) On all electrical circuits C) Circuits in dry locations D) Circuits in wet locations such as bathrooms
Seal face distortion, shown as uneven wear, may be caused by _____
a. uneven torque on the gland bolts b. gaskets protruding into the seal cavity c. light interference d. over-torquing the gland bolts