Why does the condenser line travel farther from left to right than the evaporator line in a refrigeration cycle PH diagram?
A) The condenser must get rid of the heat of the compressor as well as the heat gained in the evaporator.
B) The condenser operates at a higher temperature.
C) Extra efficiency is gained by rejecting more heat than is gained.
D) The condenser operates at a higher pressure.
A
You might also like to view...
When selecting a gas furnace, how is its heating capacity determined?
a. Its input rating must exactly match the calculated heat loss of the structure. b. Its output rating must exactly match the calculated heat loss of the structure. c. Its output rating can be up to 150 percent of the calculated heat loss of the structure. d. Its output rating should be no less than 95 percent of the calculated heat loss of the structure.
A DTC P0117 DTC is being discussed. Technician A says that the ECT sensor could be internally shorted to ground. Technician B says that the signal wire could be open. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Describe chemical energy and give an example
What will be an ideal response?
DC injection braking is used on _____
a. the stationary windings of AC motors b. compound DC motors where a slower stopping method is acceptable c. the rotors of shunt motors d. the rotors of series motors