A38 and AX38 belts should not be mixed on a drive designed to use AX38 belts because:
A. They require different sheaves for their use.
B. The A38 may be more susceptible to damage from dripping oil.
C. Either the A38 belts will be overtensioned or the AX38 belts will be undertensioned.
D. All of the above answers are correct.
C
You might also like to view...
Process control equipment purchased for $78,000 by Debco, Incorporated generated a CFBT of $26,080 during the first year of its 10-year estimated life. This would represent a return of 31.2% per year if maintained throughout the 10 years. However, the corporate finance officer determined that the CFAT was only $18,000 for the first year, and it is expected to decrease by $1000 per year thereafter. If the president wants to realize an after-tax return of 12% per year, for how many years must the equipment remain in service?
What will be an ideal response?
The most realistic pictorial view is the view drawn in _________________
Fill in the blank(s) with correct word
?What should be done if there is undercut along the top toe of a fillet weld when using the spray transfer method?
A. ?Decrease the work angle to direct more metal onto that side. B. ?Change to a leading angle. C. ?Change to a trailing angle. D. ?Use a perpendicular travel angle to make the weld pool more fluid so it will fill the undercut.
When using open or closed questions you must use one or the other and not combine their use
Indicate whether the statement is true or false