In selecting the joining process, one consideration relates to the ____, such as whether the weld will be used on a piece of furniture, or to repair a piece of equipment, or to join a pipeline.?
A. ?quality requirements
B. ?appearance of the finished product
C. ?materials to be used
D. ?size of the parts to be joined
Answer: A
You might also like to view...
Figure 10-1 The controlled variable in Figure 10-1 is the ____.
A. liquid B. steam C. either a or b
The use of a coolant exchange machine is helpful in preventing ________ from entering the cooling system.
A) Oil B) Hose residue C) Excessive vibrations D) Air
Refer to Appendix Table 24 in your textbook. In a sliding fit with a 32mm basic diameter, the maximum hole size would be ____.
A. 32.000 B. 32.021 C. 31.993 D. 31.980
Determine the following quantities for the DC shunt motor, connected as shown in the circuit of Figure 19.17:
1. Field current required for full-load operation.
2. No-load speed.
3. Plot of the speed torque curve of the machine in the range from no-load torque to rated torque.
4. Power output at rated torque.
