When an operator needs to move a backhoe through a blind area, and there is no spotter, the operator must _____.
a. blow the horn before moving the backhoe
b. move the backhoe very slowly through the area
c. not operate the equipment
d. maintain a steady speed while moving through the area
c. not operate the equipment
You might also like to view...
List two advantages to adding a cuttlebone to the habitat
What will be an ideal response?
What is the purpose of purging with nitrogen while brazing?
A) To prevent oxide formation inside the pipes B) To blow the oxides off the walls before it has a chance to firmly adhere C) To help the flame burn a little hotter D) To check for leaks at the same time you are brazing
What is the lowest acceptable overvoltage category rating for a multimeter that will be used to test small
appliances? a. CAT I b. CAT II c. CAT III d. CAT IV
Indicate what the fingers and thumb represent in the right-hand rule as shown in the following figure.
A. motion of the conductor B. direction of the magnetic field C. direction of electron flow