Vertically articulated robot arms are implemented in either a SCARA configuration or in a horizontally base jointed arm geometry
Indicate whether the statement is true or false
FALSE
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. Datum targets should be specified on parts where it is not practical (or possible) to use an entire surface as a datum feature. 2. The side of a gauge pin is often used as the datum feature simulator for a datum target line. 3. Where a datum target line or area is indicated on a non-planar surface, a flat-tipped gauge element is often used as the datum feature simulator. 4. Datum targets cannot be used to establish a simulated datum from a feature of size. 5. Datum targets can be used to establish a simulated datum from irregular surfaces.
Producing liquid fuel from coal or natural gas usually uses which process?
A) Methanol to gasoline (MTG) B) P-series C) Fischer-Tropsch D) Syncrude
The balance point of an air-source heat pump is the temperature at which:
A) The heat pump cooling capacity matches the heat pump heating capacity. B) The heat pump heating capacity just matches the building heat loss. C) The cost of operating the heat pump is the same as the cost of operating a fossil fuel furnace. D) The system low-side and high-side pressures are the same.
A(n) ____ plans the interiors of buildings with the aim of making rooms more attractive, comfortable, and functional.
A. interior designer B. interior decorator C. civil engineer D. drafter