Motors with shunted field windings:
A) Will draw higher than normal amps.
B) Are hard to detect.
C) Can be detected by comparing the actual winding resistance to the motor manufacturer's data.
D) Will not run at full speed or strength.
E) All of these.
E
You might also like to view...
Which of the following is a step in the start-up procedure for a shell-and-tube heat exchanger where the hot side is being lined up?
A. Verify that all drains and vents are shut. B. Partially open the hot side inlet valve. C. Open the cold side outlet valve. D. Establish the cold stream flow to the heat exchanger.
General work clothing should ____.
A. be made of a synthetic fabric B. be loosely woven, and a light color C. be tightly woven and a dark color D. have deep pockets
A ____________________ is a legal document that describes the customer's complaint, cause, and correction.
Fill in the blank(s) with the appropriate word(s).
Technician A says that silicone grease can be used to lubricate the shoe contact ledges. Technician B says that synthetic brake grease, lithium brake grease, or anti-seize compound can be used as a brake lubricant. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician