Technician A says that a good relay should measure between 60 and 100 ohms across the coil terminals. Technician B says that OL should be displayed on an ohmmeter when touching terminals 30 and 87. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians A and B
D) Neither technician A nor B
C) Both technicians A and B
You might also like to view...
In the accompanying figure, PM is parallel to JK. Find the measure of angle PMK.
A. 140o44' B. 154o33' C. 159o20' D. 171o10'
According to ANSI/AHRI Standard 730, for temporary use after a compressor burnout, a suction line drier can be selected for a maximum pressure drop of _____.
a. 2 psi b. 3 psi c. 5 psi d. 8 psi
Soil tilth refers to ________
A) micro-aggregates produced as a by-product of tillage B) ratio of bulk density to particle density C) the physical suitability of a soil for plant growth D) the bearing strength of a soil under a given downward force E) the moisture content at which a soil is best suited for tillage
The technician must perform the FMVSS test on every vehicle he or she repairs
Indicate whether the statement is true or false