Which is the best approach to conflict resolution?

a. Avoid conflict
b. Compromise
c. Collaboration
d. None of the above


Answer: c

Trades & Technology

You might also like to view...

The clutch plate must be removed to ________.

A) Remove and replace the compressor B) Change the compressor belt C) Get access to the compressor shaft seal D) Change the compressor oil

Trades & Technology

How are capacitors rated?

What will be an ideal response?

Trades & Technology

What is the difference between primary air and secondary air?

A) Primary air is used for the main burner and secondary air is used for the auxiliary burners. B) Primary air is mixed with the gas before ignition and secondary air is drawn in after ignition. C) Secondary air is only used if the primary air source is depleted. D) Primary air is used with natural gas and secondary air is used for LP gas.

Trades & Technology

Technicians will use an electronic weigh scale to:

A. Weigh the amount of antifreeze in the engine cooling system B. Weigh the amount of engine oil during routine maintenance C. Weigh the amount of refrigerant dispensed into the air conditioning system D. Weigh the output of the vehicles charging system

Trades & Technology