What are the six clutch components that should be inspected and measured?

What will be an ideal response?


Make certain that all of the reassembled components are in place and all fasteners are properly tightened. Check and measure the length of the clutch springs. Replace any that are out of spec then measure the thickness of the friction and steel plates. Put the clutch plates on a flat surface and check them for warpage. Visually inspect the clutch bracket bearing and then check for cracks in the clutch hub and primary gear assembly.

Trades & Technology

You might also like to view...

For human survival, approximately what percentage of the air must be oxygen?

a. 21 c. 54 b. 77 d. 42

Trades & Technology

What is the difference between drywall and wetwall?

What will be an ideal response?

Trades & Technology

Compared to a recirculating ball steering gear, a rack and pinion steering gear provides:?

A. ?Increased road feel B. ?Improved capability to isolate road noise C. ?Better capability to reduce steering harshness on road irregularities D. ?Increased capability to absorb steering kickback

Trades & Technology

A capacitive probe level detector measures a ____________________ (conductive, nonconductive) material in a container by taking ____________________ (multipoint, continuous) readings.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology