After the controller is tuned, the settings are verified by observing the decay ratio waveform on a chart recorder when the controller is in the ____ mode.

A. manual
B. automatic


Answer: B

Trades & Technology

You might also like to view...

As a rule, a ____ is prepared for each subassembly and shown in a ruled space on the drawing.

A. materials assembly B. bill of materials C. usage assembly D. usage materials

Trades & Technology

Para mantener la caída de voltaje de un circuito de 240V a un valor máximo de 3%, la caída de voltaje MÁXIMA permitida debería ser:

a. 3V. b. 5,4V. c. 6,2V. d. 7,2V.

Trades & Technology

The most common airflow problem experienced on air conditioning systems is

A) Low airflow caused by dirty or plugged air filters B) Excessive airflow caused by removing the air filter and not replacing it C) Excessive airflow caused by high operating voltage D) Low airflow caused by unusually low barometric pressure

Trades & Technology

Traditional impervious paved surfaces can be part of a sustainable site design by ____.

A. increasing their area and absorbing runoff B. directing runoff to features such as gardens and lawns C. limiting their area and directing runoff away from pervious paving areas that keep the water on site D. limiting their area and directing runoff to features such as dry wells, rain gardens, or pervious paving areas that keep the water on site

Trades & Technology