When drawing a PH diagram of an operating system, how is placement of the metering device line determined?
A) The metering device line starts where the condenser line crosses the temperature of the liquid line and then drops straight down until it crosses the evaporator line.
B) The metering device line starts where the condenser line crosses the temperature of the liquid line and then goes straight across until it crosses the compressor line.
C) The metering device line starts where the condenser line crosses the temperature of the liquid line and then drops straight down until it crosses the compressor line.
D) The metering device line starts where the compressor line crosses the temperature of the liquid line and then drops straight down until it crosses the condenser line.
A
You might also like to view...
A passenger side power window motor operates in one direction but not the other direction. Which is the most likely cause of this complaint?
A. Defective master (operators door) power window switch B. Defective passenger power window switch C. Worn brushes D. Both A and B
Determine the overall diameter, in inches, of a P345/45R16 tire. Round to the nearest tenth of an inch
What will be an ideal response?
One advantage of metric scales is that any scale is a multiple of 2; therefore, reductions and enlargements are easily performed. In most cases, no mathematical calculations should be required when using a metric scale.
Answer the following statement true (T) or false (F)
Intermodal freight transport reduces cargo handling and therefore improves security, _____, and allows freight to be transported faster.
Fill in the blank(s) with the appropriate word(s).