A measurement of the actual weight of water in a given volume of air is _____________________
A) Absolute humidity.
B) Dew point.
C) Relative humidity.
D) Absolute pressure.
C) Relative humidity.
You might also like to view...
In a CPMT, a(n) ____ should be a high-level manager with influence and resources that can be used to support the project team, promote the objectives of the CP project, and endorse the results that come from the combined effort.
A. incident manager B. champion C. crisis manager D. project manager
Which of these methods is used to clear underbrush on tree farms?
a. Mechanical means c. Prescribed burning b. Chemical means d. All answers are correct.
The difference between vent sizing for natural-draft appliances and fan-assisted appliances is that:
A) Vents for fan-assisted appliances are always the same size as the connector on the furnace. B) Columns for fan-assisted appliances list both a minimum and a maximum appliance capacity for each vent size. C) Columns for fan-assisted appliances list sizes for both vertical and horizontal installation. D) Vents for fan-assisted appliances are typically larger in diameter for the same BTU capacity.
The designation ".50-13 UNC-2A" means ____.
A. the minor diameter of the thread is 0.50 inches, there are 13 threads per inch, the classification is Unified National coarse, general purpose moderate tolerance, external thread B. the major diameter of the thread is 0.50 inches, there are 13 threads per inch, the classification is Unified National coarse, general purpose moderate tolerance, internal thread C. the major diameter of the thread is 0.50 inches, there are 13 threads per inch, the classification is Unified National coarse, general purpose moderate tolerance, external thread D. the major diameter of the thread is 0.50 inches, there are 13 pitches per inch, the classification is Unified National coarse, general purpose moderate tolerance, external thread E. none of the above