When running passes (other than the root) on open-root V-groove pipe welds in the 2G position, use stringer
beads and a slight circular or side-to-side motion to ensure fusion at the _____.
a. face of the weld bead
b. toes of the weld bead
c. root of the weld bead
d. leg of the weld bead
b
You might also like to view...
What is the sensing range for inductive prox switches from low power to high power?
What will be an ideal response?
? Identify and state the historical significance of Sally Hemings.
What will be an ideal response?
What collects on upper furnace tubes, causing oxidation failures and critically attacking refractory insulation?
A. Excess fuel B. Nitrogen oxide C. Vanadium ash D. Carburization
What is the proper depth of a planting hole?
A. just deep enough to cover the bottom of the root ball so the roots get enough air B. deep enough to cover the crown by several inches so the plant does not fall over C. planting depth does not matter as long as the plant rests on undisturbed ground D. deep enough to cover the rootball but not the crown