What conditions must be present for an OBD II system to illuminate the malfunction indicator light for a component problem?
What will be an ideal response?
The MIL will only be illuminated when the component has malfunctioned or is clearly performing outside design parameters or if emission levels will exceed 1.5 times the FTP levels.
You might also like to view...
Manual rebar cutters can be used to cut rebar in diameters up to _____.
a. 2 inches b. 1-1/2 inches c. 1 inch d. 1/2 inch
Excessive positive camber will cause tire wear ________
A) On both tire edges B) In the middle of the tire C) On the outside shoulder of the tire D) On the inside shoulder of the tire
The transparent membrane surrounding an egg's yolk is the vitelline membrane.
Answer the following statement true (T) or false (F)
A technician uses #10 wire for a repair job. Before starting the job, the roll has 85 1/4 feet of wire on it. The technician uses 1/3 of the roll. How many feet of wire does the technician use?
Fill in the blank(s) with the appropriate word(s).