If the viscosity of a fluid increases, its ability to flow __________.
A. increases
B. decreases
Answer: B
You might also like to view...
Copper or copper-clad electrodes can cause ____.
a. skin lesions to the system operators b. unexpected results at best c. electrolytic corrosion of the galvanized components d. significant 50 or 60 Hz artifacts arising from the power system's frequency
Problem 8.20 EP Electric has identified two new methods to treat its cooling water. Alternative I (for inflow) would treat the raw water with a conventional reverse osmosis system so that the cycles of concentration could be increased from 5 to 20. This will result in water cost savings of $360,000 per year and chemical cost savings of $56,000 per year. The initial cost of the equipment will be $2.3 million with an operating cost of $125,000 per year. Alternative B (for blowdown) will treat the cooling tower blowdown water using a high-pressure seawater reverse osmosis system to recover most of the water that is sent to an evaporation pond. This option will result in water savings of $270,000 per year. The cost of the system will be $1.2 million with an operating cost of
$105,000 per year. Assuming one of the two methods must be installed, determine which is preferred on the basis of the incremental ROR value using MARR of 5% per year, which is a typically low return expected of government projects. Use a 10-year study period with no salvage value for either system. (Note: See Problem 8.41 for more on this situation.) Solution 8.41 In Problem 8.20, two methods of cooling water treatment are analyzed. These are revenue alternatives which generate annual savings against their costs. (a) Perform the complete procedure for incremental ROR analysis for revenue alternatives to determine which method to select at MARR = 5% per year. (b) If a MARR of 8% per year were required, what recommendation would you make?
The type of fan or blower with a blade design that is self-cleaning and a good choice for air containing a lot of
dust or grease is the _____. A) forward-curved centrifugal B) radial C) backward-inclined centrifugal D) ducted fan
List common cooling fan designs used.
What will be an ideal response?