A retailer of building materials purchased 1,000 pieces of 2 × 12 lumber, each 10 ft long. How many board feet did the retailer purchase?
A) 20,000 bd ft
B) 1,000 bd ft
C) 100,000 bd ft
D) 10 MBF
E) None of the above
A) 20,000 bd ft
You might also like to view...
Which of the following statements about execution of a lift plan is not true?
a. All materials to be lifted must be properly staged before beginning. b. Communications must be set up, tested, and available during the lift. c. Only the lift director can issue a STOP command during the lift. d. Only the lift director can resume the lift if it is halted for any reason.
What is the difference between a ratcheting box wrench and an adjustable wrench?
What will be an ideal response?
When testing an alternator rotor, if an ohmmeter shows zero ohms with one meter lead attached to the slip rings and the other meter lead touching the rotor shaft, the rotor is ________
A) Defective (shorted-to-ground) B) Defective (rotor windings are open) C) Defective (shorted-to-copper) D) Operating normally
The positioning arrangement selected for dual dimensioning is indicated by a(n) ____________________ on the drawing.
Fill in the blank(s) with the appropriate word(s).