Answer the following statement(s) true (T) or false (F)

1.There is no need to connect a white insulated grounded conductor to any single-pole, double-pole, three-way, or four-way switch in a residential switching circuit.
2.If the circuit-equipment grounding conductor is connected to the green grounding terminal on a switch, there is no need to ground the metal device box in which the switch is installed.
3.The white wire used in a traditional switch loop wired with a two-wire cable like Type NM must be reidentified. This is normally done with black electrical tape.
4.When wiring a house using conduit, the NEC® permits a white insulated conductor to be used as a “hot” conductor in a switch loop as long as it is reidentified as such.
5.Switch loops are not permitted in three-way switch circuits.


1.true
2.false
3.true
4.false
5.false

Trades & Technology

You might also like to view...

Steam that has a pressure range from 50 to 150 psi is referred to as _____.

a. steam for heating systems b. saturated steam c. superheated steam d. condensation

Trades & Technology

The placement of parts together in a manner that will minimize the waste created is called ____________________.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Management by objectives typically leads to an increase in employee resistance to controls

Indicate whether the statement is true or false.

Trades & Technology

Steel framing has excellent properties for resisting stress from snow, wind, and seismic forces.

Answer the following statement true (T) or false (F)

Trades & Technology