What type of solids handling equipment includes a number of eccentrically mounted weights, that when rotated creates a vibration in the trough or deck?
A. Vibratory conveyors
B. Live bottom
C. Bucket elevator
D. Pneumatic conveyors
A. Correct. Vibratory conveyors have a number of eccentrically mounted weights, that when rotated creates a vibration in the trough or deck.
B. Incorrect. A live bottom is a vibratory device attached to the bottom of a bin or silo that is designed to facilitate the smooth discharge of material.
C. Incorrect. A bucket elevator is a continuous line of buckets that are attached with pins to two endless chains running over tracks and driven by sprockets.
D. Incorrect. Pneumatic conveyors are devices used to move material using pressured gas flow from one point to another in a continuous stream.
You might also like to view...
. Masonry vertical support structures spaced along a masonry wall are referred to as _____.
a. beams b. pilasters c. spandrels d. buttresses
____________________ feeds contain a high percentage of protein and carbohydrates that are usually supplied by such grains as corn.
Fill in the blank(s) with the appropriate word(s).
The left front of the vehicle is higher than the right front and the right rear is lower than the left rear. What is the most likely cause of this problem?
A) A sagging right rear spring B) A broken left front shock absorber C) A weak right rear shock absorber D) A broken track rod
A signal showing the voltage of a battery displayed on a digital storage oscilloscope (DSO) is being discussed. Technician A says that the display will show one horizontal line above the zero line. Technician B says that the display will show a line sloping upward from zero to the battery voltage level. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician