There are _____ standard brick to each square foot of wall area.
A. 6
B. 6.25
C. 6.75
D. 7
Answer: C
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. Where circular runout is applied to a cylindrical surface, the tolerance zone is two coaxial circles centered on the datum axis. 2. When establishing a datum axis, where the surface is the primary datum feature, the diameter should be long. 3. Where circular runout is applied to circular elements constructed around a datum axis, it limits the deviations in circularity, orientation, and axis offset (location). 4. In certain applications, the function of a part requires defining the total runout deviation of a diameter relative to a datum axis. In this application, the tolerance value defines the radial distance between the tolerance zone cylinders. 5. In certain applications, the function of a part requires defining the circular runout deviation of a planar surface perpendicular to a datum axis. Where circular runout is applied to a planar surface, The tolerance zone limits deviations in form, orientation, and location of the circular element.
The organizational plans that are narrowest in focus and have the shortest time frame are
a. operational plans. b. tactical plans. c. contingency plans. d. strategic plans. e. None of these.
Your neighbor is digging a hole in his back yard for an in-ground swimming pool. The rectangular hole is 21 feet wide, 42 feet long and 6 feet deep. If a truck can haul 10 cubic yards, how many trips will it take to haul all of the dirt away?
a. 10 b. 2 c. 7 d. 20
When a new bearing is installed ________
A) Before touching the bearing, wash your hands and dip your fingers in clean motor oil B) Install a new grease seal C) Both A and B D) Neither A nor B