Which of the following should be checked before returning the vehicle to the customer?
A) The vehicle is clean B) The radio is turned off
C) The radio presets and clock have been restored D) All of these are correct
D
You might also like to view...
A ____ performs data conversions that allow one type of protocol to communicate with another type of protocol.
A. hub B. bridge C. switch D. gateway
When installing a tire pressure monitoring system sensor on a wheel, the sensor should be mounted ________
A) With the flat part of the sensor facing the center section of the rim B) With the flat part of the sensor parallel to the center section of the rim C) Both A and B D) Neither A nor B
Reactive power (Pr) in an inductor is defined as the rate at which an inductor stores or returns energy and is measured in:
A) watts reactive. B) volts per time constant. C) current per time constant. D) volt-ampere reactive.
On a call for heat on an electric furnace, __________ volts should be read between R and G on the thermostat terminal strip.
A. 0 B. 24 C. 115 D. 220