As a general rule, the swap partition should be the same size as the amount of RAM in your computer.
Answer the following statement true (T) or false (F)
True
You might also like to view...
An industrial robot performs a machine loading and unloading operation. A PLC is used as the robot cell controller. The cell operates as follows: (1) a human worker places a work part into a nest; (2) the robot reaches over and picks up the part and places it into an induction heating coil; (3) a time of 10 seconds is allowed for the heating operation; and (4) the robot reaches in and retrieves the part and places it on an outgoing conveyor. A limit switch X1 (normally open) will be used in the nest to indicate part presence in step (1). Output contact Y1 will be used to signal the robot to execute step (2) of the work cycle. This is an output contact for the PLC, but an input interlock for the robot controller. Timer T1 will be used to provide the 10 second delay in step (3). Output
contact Y2 will be used to signal the robot to execute step (4). Construct the ladder logic diagram for the system. Write the low level language statements for the system. What will be an ideal response?
Which of the following statements about converting a system from one refrigerant to another is incorrect?
a. Synthetic and mineral oils are completely compatible. b. A new metering device may be required. c. Equipment capacity may change with the new refrigerant. d. Gaskets and O-rings may have to be changed.
All of the following are the proper ways to dispose of a drained oil filter EXCEPT ________
A) Sent for recycling B) Considered to be hazardous waste and disposed of accordingly C) Disposed of in regular trash D) Picked up by a service company
Door assemblies, restraint systems, and glass are classified as structural members of the passenger compartment.
Answer the following statement true (T) or false (F)