The distance from the top of the finished lower floor to the top of the finished upper floor is called the

stairway's _____.

a. vertical dimension
b. total rise
c. full flight measurement
d. total run


b

Trades & Technology

You might also like to view...

If personnel are to be hoisted, a qualified person must evaluate the situation and determine if it the lift is still safe once the wind speed reaches _____.

a. 5 mph (8.1 kph) b. 20 mph (32.2 kph) c. 30 mph (48.3 kph) d. 35 mph (56.3 kph)

Trades & Technology

Explain why the typical thickness of tilt-up wall panels is one of the following dimensions: 5-1/4 in., 7-1/4 in., or 9-1/4 in.

What will be an ideal response?

Trades & Technology

Capturing gases and odors using gas-phase filtration occurs through a process known as _____.

a. adsorption b. mitigation c. particle capture d. sterilization

Trades & Technology

A(n) ____________________ sensor changes in resistance value as the pressure applied to the sensing material changes.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology