What is the output voltage at the end of the input pulse from an RL integrator that uses a 200 mH inductor, a 22 k? resistor and a 12 V, 9.09 ?s input pulse?
A) 10.38 V B) 11.76 V C) 11.4 V D) 7.59 V
D
You might also like to view...
Technician Asays the electronic cruise control system may use a normally open vent valve. Technician B says the electronic cruise control system may utilize the electronic throttle control system. Who is correct?
A. Technician A only B. Technician B only C. Both Technician A and B D. Neither Technician A nor B
In an outdoor pool area, the NEC® requires luminaires, ceiling-suspended paddle fans, or lighting outlets not to be installed over the pool or an area extending __________ feet horizontally from the inside wall of the pool.
a. 5 b. 10 c. 12 d. 20
How can the temperature rise of a furnace be reduced if the temperature rise is too high?
What will be an ideal response?
Technician A says that in a servo-type hydraulic drum brake, each shoe is separately anchored at its heel. Technician B says that in a non-servo type brake system, the trailing shoe is only energized when the vehicle is travelling in reverse. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B