Most portable frame pullers have a thick steel table to which pulling towers and anchoring clamps are attached.
Answer the following statement true (T) or false (F)
False
You might also like to view...
What is the function of the flutes machined into a delivery valve?
A. seal the valve before it seats B. define dead volume pressure C. guide the valve in the delivery valve body D. define delivery valve opening pressure
Answer the following statement(s) true (T) or false (F)
1. Direct current is generated in rotating coils surrounded by a moving field magnet. 2. A rotating assembly of coils, placed in slots in an iron core and connected to commutator segments, is called the armature of the generator. 3. Regardless of the type of winding chosen, a coil is always wound so that its opposite sides pass beneath opposite magnetic poles simultaneously. 4. The distortion, or bending, of the main magnetic field of the generator, caused by the magnetic field of the current in the armature, is called armature disorganization. 5. The successful starting up of a generator depends on the existence of residual magnetism in the field iron.
The run winding on a compressor has a resistance of 0 ohms. This indicates that:
A) The winding is grounded. B) The winding is open. C) The winding is shorted. D) The winding has continuity and is good.
While discussing steering problems:Who is correct?
Technician A says a "jerky" steering wheel and a "clunking" noise could indicate worn steering column U-joints. Technician B says lack of assist and a "growling" noise in a fluid-filled steering pump could indicate a hose or pump internal restriction