Technician A says that all oil galleries must be thoroughly cleaned before engine assembly can begin. Technician B says that all expansion cups and plugs should be installed with a sealer to prevent leaks. Which technician is correct?
A) Technician A B) Technician B C) Both technicians D) Neither technician
C
You might also like to view...
La sobrecarga neutra en el circuito derivado de un receptáculo se puede detectar mediante:
a. una lectura de menos de 2 V a tierra. b. una lectura de más de 120 V a un conductor sin puesta a tierra. c. una lectura de más de 2 V a tierra. d. el voltaje de cambio de carga en el circuito.
Multiple form panels that are fastened together for efficient wall forming are described as _____.
a. unitized forms b. combined forms c. fabricated forms d. gang forms
A technician is checking the operation of the electronic throttle control system by depressing the accelerator pedal with the ignition in the on (run) position (engine off). What is the most likely result if the system is functioning correctly?
A) No throttle movement B) The throttle will perform a self test by closing and then opening to the default position. C) The throttle will open partially but not all the way. D) The throttle goes to wide open when the accelerator pedal is depressed all the way.
What part should be removed to test cylinder compression on a diesel engine?
A) A glow plug B) An intake valve rocker arm and stud C) An injector D) An exhaust valve