The seams between vinyl floor covering sheets are
A) adhered together with a urethane adhesive.
B) adhered together with an epoxy resin.
C) welded together with hot air.
D) welded together with hot air and vinyl bead.
E) adhered together with a vinyl adhesive.
D) welded together with hot air and vinyl bead.
You might also like to view...
As a rule, _______________ liquids have a flash point at or above 100°F.
Fill in the blank(s) with the appropriate word(s).
Analyze the frame in Figure P11.20 by the moment distribution method. Determine all reactions and draw the shear and moment curves. E is constant, but I varies as noted.
The recommended method for applying the first layer of a built-up roof to prevent seepage of tar into the
rafter spaces is to _____. a. apply a layer of tar and allow it to dry before applying the first layer of felt b. apply a dry layer of felt, followed by the first layer of tar c. apply a layer of tar, followed by insulating boards that will absorb any excess tar d. place a flexible membrane over the decking, followed by the first layer of felt and asphalt
ASE-Style Multiple Choice The term MOST-Likely used to describe a problem where engine torque is transmitted into the steering wheel under hard acceleration is:
A. torque steer B. floor tunnel C. aerodynamics D. cowl