Name the fine-finished machine screws that are generally used without a nut. Mating parts are fastened where one feature has a through hole for the fastener to pass through and the other feature is threaded to accept the fastener thread, and have a variety of head types and range in diameter from .060 in. to 4 in. Lengths vary with diameter. For example, lengths increase in 1/16-in. increments for diameters up to 1 in. For diameters larger than 1 in., lengths increase in increments of 1/8 in. or 1/4 in. The other extreme is a 2 in. increments for lengths over 10 in., and have a chamfer to the depth of the first thread.
What will be an ideal response?
Cap screws.
You might also like to view...
A flat plate floor consists of
A) a slab with beams on all four sides of the slab panel. B) a slab of constant thickness. C) a slab with drop panels at each column. D) none of the above.
De acuerdo con la ley de voltaje de Kirchhoff, la caída de voltaje total en un circuito es igual:
a. a la corriente total en el circuito. b. a la resistencia total en el circuito. c. a la cantidad de corriente dividida entre la resistencia. d. al voltaje de la fuente de alimentación.
The rubber material in timing belts can be either high-temperature ____________________ or highly saturated nitrile (HSN).
Fill in the blank(s) with the appropriate word(s).
An ISO "N6" roughness is comparable to:
A. 16 microinches B. 32 microinches C. 63 microinches D. 125 microinches