Helical springs are made in coils. Define active coils.
What will be an ideal response?
Active coils are the total number
of coils used to calculate the total deflection of a spring.
You might also like to view...
Although any receding angle from 0 degrees to 90 degrees may be used for an oblique drawing, angles between 30 degrees and ____________________ degrees should be used, which minimizes the distortion and elongation.
Fill in the blank(s) with the appropriate word(s).
When should breathing protection be used with heat exchangers?
a. During normal operations b. During abnormal events c. When toxic gases may be present d. At all times
The red brake warning lamp is dimly lit on a RWD pickup with RWAL. Which is the most likely cause?
A) Parking brake circuit malfunction B) ABS system fault C) Hydraulic system failure D) None of these are correct.
Problem 1.10 Link BD consists of a single bar 1 in. wide and 12 in. thick. Knowing that each pin has a 38 -in. diameter, determine the maximum value of the average normal stress in link BD if (a) ? = 0, (b) ? = 90°.
