In a 2-wire bulb circuit there is voltage on the feed side and the ground side with the circuit turned on. The bulb is not lit. Which of these is the most likely cause?
A) Open ground circuit B) Bad lighting switch
C) Shorted ground circuit D) Bad bulb
A
You might also like to view...
Determine the interior and exterior areas of the Commercial Building project to be painted in Appendix C.
What will be an ideal response?
An instrument called a clamp-on ammeter is so called because the tongs can be clamped around a single wire.
Answer the following statement true (T) or false (F)
Line isolation monitors must have a green signal lamp that glows when the system is isolated from ground and located _____.
a. anywhere b. in a remote area c. outside of the anesthetizing location d. so it is visible to staff in the anesthetizing location
An advantage of a warm-air electric furnace compared to an oil or gas furnace is:
A) Lower power requirements. B) Warmer supply air temperatures. C) No vent pipes, chimney, or makeup air are required. D) Lower operating cost in most parts of the country.